Mahr Digimar 817 CLM, Руководство по эксплуатации

Страница: 142 / 152

142
Mahr GmbH • Digimar 817 CLM
Make sure that the base plate is always clean. The base plate should be
freed daily of any dust, oil or cooling agents. Dirt on the air bearings has
a negative influence on both the measurement and the accuracy.
The height measuring instrument can be cleaned with a slightly
moistened cloth. Do not use detergents, which are harmful to plastics!
To clean the air bearings use a little methylated spirits (alcohol).
The battery can be changed without losing any of the data stored, but
first detach the plug from the charging device.
The charging device should later be reconnected height measuring
instrument, when in the display the battery symbol is down to being only
a ¼ black.
Over the course of time, batteries, which are not, used will discharge.
Discharged batteries lose their capacity and may cease to function. To
avoid this, batteries should be fully charged every 3 months
Do not short-circuit the batteries. This may cause a fire or even
trigger an explosion!
All maintenance work apart from that described above are to be
conducted exclusively by Mahr’s after-sales service.
Charging the rechargeable batteries
To charge the batteries, connect a charging device to the corresponding
socket. The charging condition of the batteries is displayed in the top
right part of the display as a battery symbol.
All black – fully charged, all white – fully discharged.
Example of the charged status
Battery is ca. 60% charged.
11.2 Maintenance and care
Height measuring instrument 817 CLM