Mahr Digimar 817 CLM, Руководство по эксплуатации

Страница: 116 / 152

116
Mahr GmbH • Digimar 817 CLM
Modifying production data tables:
Press the right arrow key several times until the row
„Change prod. data“ is marked.
Press the ON/OFF key, to open the setup window.
Use the up and down arrow keys to highlight one of the
6 tables; press the ON/OFF key to open a further
window in which to modify.
Row 0 is now highlighted; in this row specify a table
name (e.g. operator, machine, shift, etc.). To modify
further press the ON/OFF key, to reopen the editor
window.
Use the alphanumerical keypad to enter the
appropriate table name (e.g. operator).
In order to exit the editor window, press the ON/OFF
key (even if no alterations have been conducted).
Again press the down arrow key to highlight row 1.
Press the ON/OFF key, to edit row 1. Use the
alphanumerical keypad to enter the appropriate text
(e.g. TURN) and press ON/OFF key to conclude.
To edit row 2 etc., continue as described above (row 2
can only be highlighted and modified when row 1 has
been edited, even if no alterations have been
conducted).
Note:
If the text of one of the offered options has been
already used, it should be neither deleted nor changed,
otherwise the allocation to the measuring values is lost!
Once the table names and production data texts have
been edited, press the CE key several times to exit the
setup menu.
If you work with control charts, the height measuring
instrument will automatically use table 6 for comments
on the samples.
The entered comment is thus only saved together with
a completely measured sample. If you never intend to
use control charts (in any program), table six can be
used just like the other five tables.
Enter prod. data text:
1 TURN
ON
OFF
ON
OFF
ON
OFF
1
+ –
0
2
ABC
3
DEF
6
MNO
5
JKL
4
GHI
7
PQRS
8
TUV
9
WXYZ / : , *
ON
OFF
1. MACHINE
2. OPERATOR
3. SHIFT
4. TOOL
5. CUSTOMER
6. SAMPLE COMMENT
0. MACHINE
1. TURN
2. MILL
3. GRIND
4. BURR
5. TEST
CE