e
n
g
li
s
h
safety
23
On the Road
Danger of accident due to component failure or sudden brake lock-up.
Before each ride, make sure that the quick release or screw
system on your wheels is fitted correctly and that your wheels
cannot work loose.
Before each trip, make sure your wheels move freely and do not
contact the brake pads at any point.
Before each ride, make sure that the handlebar and stem are
correctly fitted and will not twist.
Before each ride, make sure that your brakes operate correctly
– the pressure point must be clearly perceptible and does not
change when the brake lever blade is pulled.
Before each ride, make sure that your brakes are not damaged in
any way – including with the brake lever blade pulled – (e. g.
traces of oil, cracks, etc.).
Before each ride, make sure that the disc brake rotors and the
brake pads have not reached their wear limits and are free from
lubricating substances (oil, grease, silicone, wax, etc.).
Never use brake pads contaminated with oil or grease - not even
after attempting to clean them.
After each crash, check your brake for damage and make sure it
operates correctly.
Never use your brake if damage (e. g. traces of oil, cracks, etc.) is
visible, you can hear unusual noises or if you have any doubts
about its integrity. In this case, have your brake checked in a
specialist workshop for bicycles or directly by MAGURA Service.
Danger of accident due to improper behaviour or improper equipment.
Always match your speed to the current road, weather conditions
and the total weight. Particularly in wet conditions and a high
total weight (e.g. trailers), your braking distance will be signifi-
cantly increased – always ride cautiously and be ready to brake.
Always use the front and rear wheel brakes simultaneously.
Always observe the traffic regulations in the country where you
are riding (lighting, reflectors, etc.) and the local regulations
relating to mountain biking.
When riding, always wear a high quality (e.g. ANSI certified),
undamaged cycling helmet and clothing that fits snugly but does
not impair your actions.
Only ride your bicycle if you are in good physical condition and
your bicycle and all of its components are in perfect working
order.
Transport & Storage
Danger of accident due to brake failure caused by damaged parts.
Always place the transport device between the brake pads when
the wheel is removed – do not pull the brake lever blade if the
transport device is not in position.
Make sure that brake hoses cannot be kinked when you pack
your bicycle.
Do not store your MAGURA brake at below -15 °C (5 °F) or above
55 °C (131 °F).
L
It is not necessary to drain your MAGURA brake before transport-
ing it by air.
Protection of the environment
Dispose of used lubricants and oil correctly and in accordance with the
legal requirements – never discard them in the sewage system or in
the ground.
Содержание Storm CL
Страница 2: ......
