©
2014 Magnum Energy, Inc.
Page 17
Setup
STANDBY MODE
Current from the grid/generator to the inverter’s
AC input is used to power the inverter’s AC loads
and to charge the battery.
Example below:
Current to inverter input (AC Input)
= 20 Amps AC
Current to power the AC loads (AC Load)
= 10 Amps AC
Current to charge battery (Inv/Chg Amps)
= 10 Amps AC
MAGNUM
INVERTER
AC Input =
20 Amps AC
A
AC Load =
10 Amps AC
Inv/Chg Amps=
10 Amps AC
A
Inverter
Amp meters
=
A
A
AC CURRENT
(GRID/GEN)
DC CURRENT
(BATTERY)
INVERTER
AC LOADS
120ADC
TO
BATT
-20AAC
.
FROM
GRID
10AAC
.
TO
LOADS
.
LOAD SUPPORT MODE
(MSH Series Only)
The MSH Series uses current from the battery to
assist in powering the
inverter’s AC loads
and to
reduce the current from the grid/generator.
Example below:
Current to inverter input (AC Input)
= 10 Amps AC
Current to power the AC loads (AC Load)
= 20 Amps AC
Current from battery (Inv/Chg Amps)
= -10 Amps AC
MSH SERIES
INVERTER
AC Input =
10 Amps AC
A
AC Load =
20 Amps AC
Inv/Chg Amps=
-10 Amps AC
A
Inverter
Amp meters
=
A
A
AC CURRENT
(GRID/GEN)
DC CURRENT
(BATTERY)
INVERTER
AC LOADS
-120ADC
FROM
BATT
-10AAC
.
FROM
GRID
20AAC
.
TO
LOADS
.
INVERT MODE
Current from the battery is used by the inverter
to power the inverter’s AC loads.
Example below:
Current to inverter input (AC Input)
= 0 Amps AC
Current from battery (Inv/Chg Amps)
= -10 Amps AC
Current to power the AC loads (AC Load)
= 10 Amps AC
MAGNUM
INVERTER
AC Input =
0 Amps AC
A
AC Load =
10 Amps AC
Inv/Chg Amps=
-10 Amps AC
A
Inverter
Amp meters
=
A
A
AC CURRENT
(GRID/GEN)
DC CURRENT
(BATTERY)
INVERTER
AC LOADS
-120ADC
.
FROM
BATT
0AAC
FROM
GRID
10AAC
TO
LOADS
02C Input Amps
0 Amps AC
02D Inv/Chg Amps
-
10 Amps AC
02B Load Amps
10 Amps AC
02C Input Amps
20 Amps AC
02B Load Amps
10 Amps AC
02D Inv/Chg Amps
10 Amps AC
02C Input Amps
10 Amps AC
02B Load Amps
20 Amps AC
02D Inv/Chg Amps
-
10 Amps AC
Figure 3-8, Current Flow – Load Support Mode
Figure 3-6, Current Flow – Inverter Mode
Figure 3-7, Current Flow – Standby Mode
