Magnum Energy ME-ARC Series Скачать руководство пользователя

Страница: 2 / 107

Disclaimer of Liability

Since the use of this manual and the conditions or methods of installation,

operation, use and maintenance of the ME-ARC is beyond the control of

Magnum Energy, Inc., this company does not assume responsibility and

expressly disclaims liability for loss, damage or expense, whether direct,

indirect, consequential or incidental, arising out of or in any way connected

with such installation, operation, use, or maintenance.
Note as well that while every precaution has been taken to ensure the

accuracy of the contents of this manual, the speci

cations and product

functionality may change without notice. Magnum Energy, Inc. assumes no

responsibility for errors or omissions.

Restrictions on Use

The ME-ARC remote may only be used in life-support devices or systems

with the express written approval of Magnum Energy. Failure of the ME-ARC

remote can reasonably be expected to cause the failure of that life-support

device or system, or to affect the safety or effectiveness of that device or

system. If the ME-ARC remote fails, it is reasonable to assume that the

health of the user or other persons may be endangered.

Copyright Notice

copy, distribute, and/or modify this document is prohibited without express

written permission by Magnum Energy, Inc.

Document Information

Description – ME-ARC Owner’s Manual
Part Number and Revision – 64-0030 Rev

Date Published – June 2012
This manual is printed without color for cost savings. However, this entire

manual is available for download under the Document Library tab at

www.magnumenergy.com with many of the

gures available in color.

Contact Information

Magnum Energy, Inc.
2211 West Casino Rd.
Everett, WA 98204
Phone: 425-353-8833
Fax: 425-353-8390
Web:

http://www.magnumenergy.com

Statement of Appreciation

From all of us at Magnum Energy –
Thank you for purchasing this ME-ARC remote.
We understand that you have many purchasing options in the marketplace,

and are pleased that you have decided on a Magnum Energy product. This

ARC remote was proudly assembled and tested in the United States in our

Everett, Washington, facility.
At Magnum we are committed to providing you with quality products and

services, and hope that your experience with us is pleasant and professional.

Magnum Energy® is a registered trademark of Magnum Energy, Inc.

Содержание ME-ARC Series












































































































Результаты поиска

Содержание ME-ARC Series

Отзывы:

Похожие инструкции для ME-ARC Series

Бренды по названию

Популярные бренды

Magnum Energy ME-ARC Series, Руководство пользователя

Результаты поиска

Содержание ME-ARC Series

Отзывы:

Похожие инструкции для ME-ARC Series

Бренды по названию

Популярные бренды