Maeda MK0003, Руководство по обслуживанию, Страница: 304 / 348

5-10
2.3 NAME AND CONTENT OF THE DIGITAL OPERATOR
Display Name Content
POWER LED Lights up (green) when the inverter power is being supplied.
ALARM LED Lights up (in red) when the inverter is tripped.
Refer to “Method to release (reset) the trip status” for the trip
release method.
Program LED Lights up (in green) when data that can be changed (setting value)
is displayed on the display part.
If there is an inconsistency in the setting value, the LED will blink.
RUN (running)
LED Lights up (in green) when the inverter is running. (The LED lights
up with “OR” condition of [Run command exists] and [Inverter
outputting], so it will light up when the run command is issued with
0 Hz setting frequency, or during the deceleration after the run
command OFF.)
Monitor LED (Hz) Lights up (in green) when the data displayed in the display part is
frequency.
Monitor LED (A) Lights up (in green) when the data displayed in the display part is
current.
Operation
command
enabled indicator
LED Lights up (in green) when the run command is set in the operator.
(when the RUN key is enabled on the operator)
Display part Displays data (in red) such as various parameters and
frequency/setting values.
RUN key Runs the inverter. However, this is enabled when the run command
is operator.
STOP/RESET key The inverter decelerates/stops. (The STOP/RESET key is enabled
(default setting) even when the run command is not set to the
operator, but this can be disabled in the settings (b087).)
Resets (returns from trip status) when the inverter is tripping.
Data display part
Operation
command enabled
Operation key
USB connector
RJ45 connector