Maeda MK0003, Руководство по обслуживанию, Страница: 195 / 348

2-167
[4] Monitor 4: Hook selector screen
When “Winch setting screen selector button” on the monitor 2 screen is pressed, the winch selector screen (the
figure below) is displayed.
When the home button on the upper right is pressed, the screen returns to the home screen of the monitor 1.
(1) Fixed hook selector button
When “Fixed hook selector button” is pressed, the condition is set to
the fixed hook specification.
Set position of fixed hook. Display of position changes by pressing
select button (1).
No winch operation can be performed.
Even if the condition is set to the fixed hook specification, select “Winch” with the winch installation selector
button of (3) when the winch unit is installed on the boom.
When the setting is completed, press the home button to return to the home screen of the monitor 2.
When fixed hook is selected and then return to home, message of “Select! Hook position” appears in blinking all
times. If actual position of fixed hook matches, crane can be used safely even the message is shown.
If crane is operated with setting of fixed hook position not matched to actual position, crane may tip.
(1) Fixed hook selector button (3) Winch installation selector button
(2) Wire single fall selector button