Maeda CC423S-1, Руководство по эксплуатации

Страница: 169 / 278

161
5.1.1 LOADING
1. Select a level and firm road surface for loading the
machine. In addition, keep enough distance from the
roadside.
2. Brake the trailer securely. Place wheel blocks next to the
wheels of the trailer to secure the trailer.
3. Ramp boards must be suitably aligned so that the
machine rests in the centre of the trailer.
NOTES
• Set the right and left ramp boards in parallel at the same
distance for the right and left with respect to the centre
of the trailer.
• The installation angle of the ramp boards must be 15
degrees or less.
• Securely hang the hooks of the ramp boards on the
hooks of the trailer.
• If the ramp boards are bent by the machine weight,
place a block such as lumber under the ramp boards to
prevent bending.
4. Start the engine.
Warm up the engine enough in cold climate.
5. Place the lock lever (1) at the Free position (F).
6. Maintain low idling, keeping the engine at low speed.
7. Do not operate the speed-up pedal.
8. Before mounting the ramp boards, check that the
machine is positioned directly facing them and that the
centre line of the machine is aligned with the centre line
of the trailer.
Fix the direction toward the ramp boards and proceed
slowly.
Do not operate any other lever than travelling levers on
the ramp boards.