Maeda CC423S-1, Руководство по эксплуатации

Страница: 33 / 278

25
2.2 CAUTIONS WHEN STARTING ENGINE
PAY ATTENTION TO WARNING SIGNS
When warning sign “DANGER. Do NOT operate” is put up, the
machine is being inspected and under maintenance. Do not start
the engine and refrain from touching operating levers. Disregarding
the warning sign to operate the machine may give rise to the
danger of involving the maintenance personnel into the rotating
parts or movable parts of the machine, resulting in serious injury.
INSPECTING AND ADJUSTING BEFORE STARTING ENGINE
Prior to starting the engine at the beginning of the day, perform items under “Operation 3.1 Inspections
and Adjustments Before Starting the Engine” and conduct the following inspections. Omitting these
inspections may cause serious bodily accidents.
• Never fail to execute the inspection before starting work.
• Remove the contamination on the window glass surface to secure good view.
• Clean the lens surface of head lamps and working lights and ensure that they are properly lit.
• Check the coolant water level, fuel level, engine oil pan level, air cleaner for any clogging and electric
wiring for any damage.
• Adjust the operator’s seat to the operator’s posture for easy work. Also, check seat belts and their
mounting fixtures for any damage or abrasion.
Refer to the descriptions under “Operation 3.1.2 Pre-operation Inspection (Adjusting the Operator’s
Seat)”.
• Adjust the mirrors to the best position for commanding a good view of rear scene from the operator’s
seat.
Refer to the descriptions under “Operation 3.1.2 Pre-operation Inspection (Adjustment of Mirrors)”.
• Check pedals for any dirt or foreign matter deposited on their movable parts and ensure that they can
function satisfactorily.
• Check instruments to ensure that they function properly and each of the operating levers is in its
neutral position.
Always repair if any result of the above is faulty.
CAUTIONS BEFORE STARTING ENGINE
• Make sure nobody is on or under the machine and in its vicinity
and nobody or no hazard is found within the boom slewing range.
• Do not allow anyone other than the operator to get on the
machine.
• Start the engine only when the operator is sitting on the operator’s
seat.
• Check to ensure that each of the operating levers is in its neutral
position.
• Check to ensure that lock lever (1) is in the “LOCK” position (L).
• Honk the horn for warning before starting the engine.
• Do not start the engine by short-circuiting the starter circuit. This
may cause a fire.