97
[4] INSPECTION AROUND UPPER SLEWING BODY
• Check for fuel, oil or water leakage from the engine and check tubes and hoses for damage, repairing
parts as necessary.
• Check for any accumulation or deposits of inflammable items including fallen leaves, wastepaper, dust,
oil or grease in high temperature areas such as engine muffler and around batteries. If any
accumulation or deposits are found, remove them.
• Check for slack wiring, loose connections or any trace of burning around the starter, alternator or
battery. Repair if any abnormality is found.
• Inspect if there are oil leaks from hydraulic equipment, hydraulic oil tank, hydraulic hose and joints.
Repair if any abnormality is found.
• Check handrails and steps for cracks, remarkable deformation and contamination. Repair if any
abnormality is found. Check also bolts, nuts for looseness, falling off and damage. Repair if any
abnormality is found.
• Check the tri-colour revolving working status lamp for breakage, significant deformation and dirt. Repair
if any abnormality is found. Clean as necessary.
[5]
INSPECTION AROUND OPERATOR’S SEAT
• Inspect if windows come off or broken and if window glasses are cracked or broken. Repair if any
abnormality is found. If the window comes off or breaks during work, stop the work immediately and
repair the window.
• Check the seat belt and mounting brackets for abnormalities and replace with new parts if there is
damage.
• Inspect if each operation lever, travel lever, lock lever and accelerator pedal operate smoothly.
Repair if any abnormality is found.
• Check the machine monitor for any damage or dirt. Repair or replace if any abnormality is found. Clean
as necessary.
• Check for slack wiring, lose connections and any trace of burning. Repair if any abnormality is found.
• Check the headlamp for breakage, remarkable deformation and contamination. Repair if any
abnormality is found.
[6] INSPECTION OF BASE CARRIER
• Check parts of undercarriage (frame, crawler, each roller, idler and sprocket) for cracks, remarkable
deformation and contamination. Also, check for the loosened, missing or damaged bolts, nuts, and pins.
Repair if any abnormality is found.
• Look out the undercarriage and its lower part and check bolts, nuts, pins and piping connections for
looseness, falling off, damage and oil leaks. Repair if any abnormality is found.
Содержание CC423S-1
