Maeda CC423S-1, Руководство по эксплуатации

Страница: 28 / 278

20
1.4 CAUTIONS IN GETTING ON AND OFF THE MACHINE
USE A HANDRAIL AND STEPS WHEN GETTING ON AN OFF THE MACHINE
When getting on and off the machine, be sure to observe the
following precautions in order to prevent physical accidents such as
slipping and falling or tumbling.
• Use the arrow-marked handrails and steps shown in the figure at
the right when getting on and off the machine.
• When getting on and off the machine, always face the machine,
allow the three parts of limbs (both feet and a hand, or a foot and
both hands) to come into contact with the hand rails and steps to
hold your body.
• Before getting on and off the machine, check the handrails and
steps for any damage or loosening, and for any oil or dirt sticking to
the machine surface. When oil or dirt is deposited, do not fail to
thoroughly clean it so that the surface is not slippery. Repair any
damage and re-tighten any loosened bolts.
• Do not grasp operating levers and locking levers when getting on
and off the machine.
• Never step on the engine bonnet and cover that are not treated with
anti-skidding coating.
• Do not get on or off the machine while holding a tool in hand.
• Do not jump on or off the machine. Also, do not get on or off the
moving machine.
• Even if the machine unexpectedly begins to move unmanned, never
jump on it to stop it.
CAUTIONS IN STANDING UP FROM THE OPERATOR’S SEAT OR LEAVING THE MACHINE
• Before standing up from the operator’s seat, such as to make
adjustments to the operator’s seat, be sure to retract the crane, set
the lock lever (1) to “LOCK” position (L) and to stop the engine.
Inadvertently touching operating levers may cause the machine to
suddenly move and invite serious injury.
• When leaving the machine, be sure to retract the crane, set the lock
lever (1) to “LOCK” position (L), and stop the engine. Also apply
every lock, be sure to bring the key back, and store it in a specified
place.