Maeda CC423S-1, Руководство по эксплуатации

Страница: 153 / 278

145
3.19.3 OPERATION OF TRAVELLING HOIST WORK
• When performing travelling hoist work, read “Operation 3.19.1 Precautions for Travelling
With Hoisted Load” thoroughly and take care to perform work safely.
• When performing travelling hoist work, be sure to sit on the operator’s seat and carefully
perform the travelling hoist operation.
• Check the safety in the vicinity of the machine and honk the horn before starting to move the
machine.
• When changing the forward/backward movement of the machine or the direction, check the
safety in the vicinity of the machine and honk the horn before making a change.
• Keep the engine speed low during travelling and slowly and carefully travel.
Keep an extra distance so that the hoisted load or machine does not crash against other
machine or structure.
1. Refer to “Operation 3.7 Starting (Forward and Backward)/Stopping the Machine” and “Operation 3.8
Changing Direction of the Machine” before travelling with the machine.
2. Refer to “Operation 3.13 Hoisting and Lowering” and “Operation 3.14 Boom Derricking Operation”
before performing crane operations. At this time, keep the hoisted load height near the ground so that
the load does not sway.
NOTES
When the overload stop function of the moment limiter is activated, refer to “Operation 2.3.3 Moment
Limiter Operation and Cancelling (Recovery)”.
3.19.4 CANCEL OPERATION OF TRAVELLING HOIST OPERATION POSTURE
1. Refer to “Operation 3.7 Starting (Forward and
Backward)/Stopping the Machine” and “Operation 3.21
Parking the Machine” before parking the machine.
2. Press and hold the travelling mode selector switch on the
monitor.
The mode is set to the rest mode and the monitor display
changes.
3. Refer to “Operation 3.6 Machine Travelling Posture” to
put the machine in the travelling posture.