manualshive.com logo in svg

Mackie D8B 3.0, Руководство пользователя

Mackie D8B 3.0 - качественный цифровой микшерный пульт для профессиональных звукорежиссеров и музыкантов. Скачайте бесплатно Руководство пользователя на manualshive.com, чтобы получить полное представление о том, как использовать все функции этого мощного оборудования.

Поделиться
Скачать
background image

D8B Manual • Chapter 4 • page  91

Installation and Connection of

Optional I/O  and Effects Cards

The Input/Output cards are an essential part

of the D8B multitrack system. These cards
provided up to 24 tape outputs and inputs for use
with any common analog and digital formats.

Since the I/O cards are optional and interchange-

able, you probably need to install them before you
begin creating hit recordings. If you install multiple
types of I/O cards, note which slots they’re installed
in. Making a note of each I/O card type and its exact
slot will help avoid subsequent problems.

There are several optional cards available for

the Digital 8•Bus which you can install into the
card cage in the rear panel of the console. These
cards provide additional inputs and outputs for
specific applications, or additional digital signal
processing power for effects.

AIO•8 (Analog Hookup)

This card provides 8 analog line-level inputs

and outputs. Connections are made through two
25-pin D-Sub connectors. You can install this card
in any of the Tape In/Out slots, or in the ALT I/O
slot.

DIO•8 (Digital Hookup)

This card provides 8 digital inputs and 8 digital

outputs. Connections are provided in both ADAT
Multichannel Optical Interface and Tascam T/DIF-1
formats. You can install this card in any of the Tape
In/Out slots, or in the ALT I/O slot. You can mix any
combination of the AIO•8 and DIO•8 cards in the
Tape I/O slots to suit your particular application. You
can configure the card in the GUI (Setup>Digital I/O)
and select the I/O connector you wish to use.

Connections for ADAT

The connection for ADAT is made with a fiber

optic cable, sometimes referred to as “lightpipe.”
This connection provides 8 channels of digital audio.
You can purchase this cable from your Alesis dealer,
Monster Cable, Hosa, or other cable manufacturer.

Connections for DA-88

The connection for T/DIF-1 is made with a 25-pin

D-Sub connector. This connection provides 8 channels
of bidirectional digital audio. This connection requires
a 25-pin D-sub cable (Tascam Part Number PW-88D).

OPT•8 Card (ADAT Optical)

The inexpensive ADAT optical card functions

with any device incorporating the ADAT format
digital optical lightpipe. The OPT•8 card configures
itself automatically; it doesn’t need to be adjusted
in the Setup>Digital I/O window. Lightpipe connec-
tions between the D8B and the connected record/
playback device are clean and efficient.

PDI•8 Card (AES/EBU)

This card provides 8 digital inputs and 8 digital

outputs in the AES/EBU standard format.
Connection is made through a 25-pin D-Sub
connector. You can install this card in any of the Tape
In/Out slots, or in the ALT I/O slot.

AES/EBU is a standard two-channel digital

protocol used for long balanced cable applications.
Thus, each conductor actually transmits two
channels of digital audio data.

MFX Effects Card

This card provides two additional DSP en-

gines for running internal effects. The Digital
8•Bus is shipped with one MFX card installed in
Slot A. You can install up to three more MFX
cards in Slots B, C, and D.

UFX Effects Card

This card provides up to four additional DSP

engines for running internal effects. The UFX
architecture provides access to the newest and
coolest third-party plug-ins, as well as an array of
groovy new Mackie plug-ins. The D8B effects card
slots accommodate any combination of UFX and
MFX cards.

Содержание D8B 3.0












































































































































































Отзывы:

Нет отзывов

Похожие инструкции для D8B 3.0

Bajaj SM01 Use & Care Manual preview
SM01
Бренд: Bajaj Страницы: 6
Mackie PPM1008 Mode D'Emploi preview
PPM1008
Бренд: Mackie Страницы: 32
Velp Scientifica HSC Instruction Manual preview
HSC
Бренд: Velp Scientifica Страницы: 28
Mad Professor LITTLE GREEN WONDER Owner'S Manual preview
LITTLE GREEN WONDER
Бренд: Mad Professor Страницы: 2
Bamix SliceSy Full Instruction Manual preview
SliceSy
Бренд: Bamix Страницы: 104
Oster 6 Speed Hand Mixer User Manual preview
6 Speed Hand Mixer
Бренд: Oster Страницы: 2
Northern Industrial 109048 User Manual preview
109048
Бренд: Northern Industrial Страницы: 4
Avid Technology VENUE E6L Rework Instructions preview
VENUE E6L
Бренд: Avid Technology Страницы: 10
Wolfgang Puck BKMT0020 Use And Care Manual preview
BKMT0020
Бренд: Wolfgang Puck Страницы: 16
Globe SPC10 Instruction Manual preview
SPC10
Бренд: Globe Страницы: 20
Bosch MSM6BRE Operating Instructions Manual preview
MSM6BRE
Бренд: Bosch Страницы: 70
Zoom G5n Operation Manual preview
G5n
Бренд: Zoom Страницы: 56
Yamaha RM804 Operation Manual preview
RM804
Бренд: Yamaha Страницы: 12
Yamaha RM800 User Manual preview
RM800
Бренд: Yamaha Страницы: 163
T-Rex Twister User Manual preview
Twister
Бренд: T-Rex Страницы: 5
T-Rex ToneBug User Manual preview
ToneBug
Бренд: T-Rex Страницы: 5
T-Rex The Sweeper User Manual preview
The Sweeper
Бренд: T-Rex Страницы: 5
T-Rex SQUEEZER User Manual preview
SQUEEZER
Бренд: T-Rex Страницы: 7

Бренды по названию

Популярные бренды

Загрузить еще бренды