Mackie D8B 3.0, Руководство пользователя

Страница: 103 / 171

D8B Manual • Chapter 4 • page 97
❏
Once each channel is verified and audible, press
channel mute.
21
45 22
46 23
47
10
dB
30
20
10
40
5
5
U
60
50
10
dB
30
20
10
40
5
5
U
60
50
10
dB
30
20
10
40
5
5
U
60
50
RET 5
BUS 5
RET 6
BUS 6
RET 7
BUS 7
SELECT
MUTE
SOLO
SELECT
MUTE
SOLO
SELECT
MUTE
SOLO
❏
Set Master Fader to Unity position.
MASTER
L/R
10
dB
30
20
10
40
5
5
U
60
50
❏
Turn channel faders up to hear instrument or mic.
1
25
10
dB
30
20
10
40
5
5
U
60
50
FX 1
GROUP 1
❏
Connect multitrack ins and outs to D8B.
❏
Follow basic power-up procedure.
❏
Select Mic/Line fader bank.
❏
Press phantom power button on the rear of
the console for necessary mic inputs.
❏
Press Mic button on channels using
microphone inputs.
❏
Set pre-fader auxes in Setup Window for
monitor use.
❏
Test each instrument and mic to verify
sufficient level at console input meter.
❏
Adjust input trim for a reading around –15 on
the meter.
❏
Press L/R in the ASSIGNMENT section to
confirm Assign lights on for all desired
channels. Or, look onscreen to verify all
necessary channels have L/R button
highlighted in Bus Assign section.
❏
Set Master Fader to Unity position.
❏
Turn channel faders up to hear instrument
or mic.
❏
As each channel is verified and audible, press
channel mute.
❏
Assign Fader Bank 1 channels to desired
tape track inputs.
❏
Place tape inputs in
record/ready to verify
signal at machine. It’s
typically best to monitor
signal from the multitrack rather than from
the channel input.
❏
If levels on the multitrack appear too hot or
cold, adjust level with the LEVEL TO TAPE
control. Select TRACKING LEVEL. This sets
the channel V-Pots to adjust the D8B output
level to tape.
❏
Remove Fader Bank 1 from the L/R mix.
❏
Adjust control room monitor mix from Tape
return in Fader Bank 2.
❏
Set levels in headphone system for
musicians.
❏
Adjust headphone monitor volume in the
PHONES/CUE MIX section.
❏
Adjust channel aux levels to onboard or
outboard effects from Fader Bank 2.
❏
Verify that Master Output is connected to
the mixdown machine.
❏
Record a pass on the multitrack.
❏
Play multitrack back.
Multitrack Tracking Checklist
T
RACK
F
AST