Mackie D8B 3.0, Руководство пользователя

Страница: 52 / 171

D8B Manual • Chapter 3 • page 46
Digital Trim
• The blue bar above the Compressor, Gate, EQ, and
Phase buttons graphically indicates the digital
trim level.
• While adjusting Digital Trim, the track number
window below the Auxes displays the digital trim
level whenever Digital Trim is selected for the
V-Pot on the control surface or on-screen.
• Click and drag left or right to change the trim
level.
• Control-click to set trim level to unity.
• Right-click and drag to copy trim level across
multiple channels.
Level To Tape
• The red bar above the Digital Trim indicates Level
To Tape.
• Click and drag left or right to change the level.
• Control-click to set level to unity.
• Right-click and drag to copy trim level across
multiple channels.
• Faders to Tape mode (Options menu) ties the
source channel fader to the tape level output.
Notice, in this mode when the TAPE Bank is
selected a change in the fader displays a change
in the Tape Output level indicator.
Multitrack Direct Outs
• A hyphen in the OUT box indicates no direct out
assignment.
• Click and hold in the OUT box to see the Tape Out
list.
• Drag down the list to the desired output, then
release the mouse button.
• Fader Banks 1, 2, 3, and the BUS OUTS 1–8 (in
Bank 4) can be routed to the direct outs 1–24.
• Click on “Reset Channel Only” to deselect all tape
output assignments for the selected channel.
• Click on “Reset All” to globally deselect all
channel and bank tape output assignments.
• Click on “Set Channel to All” to send the selected
channel to all 24 tape outputs. This is a
convenient way to track a single mic or
instrument while overdubbing (for the umpteenth
time) to multiple tracks. Simply select the desired
record track on the multitrack recorder. The
signal will always be there for you.
• Click on “Bank to Outputs” to send all 24 channels
on the current bank to consecutive tape tracks.