Mackie D8B 3.0 Скачать руководство пользователя страница 57

Страница: 57 / 171

D8B Manual • Chapter 3 • page 51

May I See A Menu Please

There’s amazing power and flexibility in the

Menus and Screens built into the Mackie OS. This
guide will serve as an excellent Quick Reference
for each menu and screen.

The File Menu

Contains:

• New Session (Ctrl+N)

• Open Session (Ctrl+O)

• Close Window (ESC)

• Save Session (Ctrl+S)

• Save Session As…

• Save As Template

• Reset Template

• Desktop (Ctrl+D)

• Shutdown (Ctrl+Q)

Let’s take a quick look at each menu item.

New Session (Ctrl+N)

• Select this to—wait, let me guess—start a new

session.

• The OS will ask you to save changes to the

current session.

• Next, you get the chance to name the session,

select which folder it ends up in, create a new
folder to put it in, or cancel.

• The session can be saved to the internal hard

drive or to a 3.5" floppy disk.

• A session consists of all snapshots, automation

data, and—if you choose—custom EQ, effects,
and dynamics patches.

• A new session uses the Template as its initial

status.

Open Session (Ctrl+O)

• Press Ctrl+O or click the File menu, drag down to

Open Session, and release.

• Use this to open a preexisting session file.
• As soon as the session is opened, the faders and

all other parameters move to their proper settings
for the opened mix or snapshot.

Close Window (ESC)

• Press Ctrl+W, ESC, or click the File menu, drag

down to Close Window, and release.

• Closes the front window (Setup, Snapshots,

Locator, Surround, Event List, Mix Editor Fat
Channel, or any menu screen with a CLOSE icon
in the upper right corner).

Save Session (Ctrl+S)

• Press Ctrl+S or click the File menu, drag down to

Save, and release.

• Saves the current session to its assigned hard

drive or floppy disk.

• If you don’t choose to activate the D8B automatic

save feature, press Ctrl+S often to ensure against
lost work—stuff happens.

Save Session As…

• Click the File menu, drag down to Save Session

As…, and release.

• Enter a new file name (or use the default name)

and select destination folder and/or drive.

• An extremely useful feature for saving variations

of a session.

• Lets the current session be saved under a new

name, leaving the original file untouched from
that point on.

• Good for backing up session data under a new file

name, or to a floppy or external drive.

Save As Template

The Startup session is no longer the “tem-

plate” for new sessions, as it was in v2.0. The
startup file is like any other; it is only created and
named “Startup” if no other file exists.

The Template is stored separately, but it can

be updated at any point with the current static mix
levels, setup parameters, and track attributes of
any given mix. Simply pull down the File menu
and initiate the Save Template operation.

The following are stored in the Template:

•

Channel Name

•

Noise Filter setting (in Channel List)

•

Channel Layout (rearrangement)

•

MDS Network settings

•

Stereo/Surround setting

•

Current Tempo (default to 120 bpm)

•

Time View (SMPTE/BBT/Milliseconds)

•

Mix Editor – Grid Setting (resolution—called
Snap Grid in the pull-down), Enable Snapping,
Snap to Cues, Snap to Grid

Содержание D8B 3.0












































































































































































Результаты поиска

Содержание D8B 3.0

Отзывы:

Похожие инструкции для D8B 3.0

Бренды по названию

Популярные бренды

Mackie D8B 3.0, Руководство пользователя

Результаты поиска

Содержание D8B 3.0

Отзывы:

Похожие инструкции для D8B 3.0

Бренды по названию

Популярные бренды