manualshive.com logo in svg

Mackie D8B 3.0, Руководство пользователя

Mackie D8B 3.0 - качественный цифровой микшерный пульт для профессиональных звукорежиссеров и музыкантов. Скачайте бесплатно Руководство пользователя на manualshive.com, чтобы получить полное представление о том, как использовать все функции этого мощного оборудования.

Поделиться
Скачать
background image

D8B Manual • Appendices • page  136

Appendix B
IVL Vocal Studio

About the IVL Vocal Studio

The IVL Vocal Studio is a truly unique tool that

offers natural sounding harmonies, wild vocal
effects, and vocal utilities. You will hear that Vocal
Studio can help you to quickly create killer vocal
tracks. In order to get you excited—and for your
general information—here is what’s packed into IVL
Vocal Studio:
• Formant-Preserving Pitch Shifting
• Intelligent Vocal Harmony (with four

operating modes)

• Pitch Corrector
• Vocal Special Effects
• Integral Reverb Effect

Technologies Used

Formant-Preserving Pitch Shifting:

 No

chipmunks or Darth Vader here! With IVL’s patented
formant-preserving pitch shifting algorithm, the
Vocal Studio uses precise analyzation techniques on
the input voice to naturally shift it higher or lower.

Pitch recognition:

 IVL does more than just take

a note and shift its pitch. The pitch shifting
algorithm detects the exact pitch of the note in order
to provide the most natural shifted sound.

Intelligent Harmony:

 The Vocal Studio has

musical knowledge. It took lessons from some
amazing musicians. By using different control modes,
you can choose how much of this intelligence the
Vocal Studio will use when creating your harmonies.
By selecting the key and scale that the vocal passage
is in, and with IVL Vocal Studio’s pitch recognition, an
intelligent harmony can be created with 1 to 4 voices.

Voice Muting:

 These buttons allow you to mute

individual voices. When Voice Muting is ON, the
audio signal passes through Vocal Studio’s
processing. When MUTE is selected, the audio signal
is muted for that voice. The small number to the left
of each button corresponds to the Harmony
Ensemble voice that it affects.

Note:

 The Digital 8•Bus ships with one MFX (Mackie

Effects) card installed. You can load it with either the
Mackie Effects plug-in or the IVL Vocal Studio plug-in.
The IVL Vocal Studio software will run in demonstration
mode, where it times out after about 10 minutes of use.
You must then download the plug-in to the card once
again to activate it for another 10 minute session.

To authorize the IVL software plug-in, simply purchase
and install a second MFX card into your Digital 8•Bus.
Then you can download the Mackie Effects plug-in to
one card, and the IVL Vocal Studio plug-in to the other
card and use them both for as long as you like.

The Interface

Menu

Click this button to save and load your own

presets, save changes made to an existing preset,
rename a preset, copy current settings to the
clipboard, and paste settings from the clipboard to
any other Vocal Studio preset.

On/Off

This button turns the IVL Vocal Studio on or off.

Processing Mode

Use this button to select either Harmony or Pitch

Correct mode.

Harmony:

 This button puts the IVL Vocal Studio

into harmony mode, allowing 4 voices of harmony or
doubled voices to be added to a mix.

Pitch Correct:

 This button puts the IVL Vocal

Studio into pitch correct mode, allowing a vocal line
to be nudged to the note your ear wants to hear.

Output Mode

Stereo:

 This button selects two independent

mono in/stereo out effects blocks. One effects block
is used for pitch shifting, harmony, and doubling. The
second effects block, assigned to a second aux send,
is used for reverb. The input to the reverb effects
block comes from a mix of its assigned aux send and

Содержание D8B 3.0












































































































































































Отзывы:

Нет отзывов

Похожие инструкции для D8B 3.0

Lakeland 62575 Instruction Booklet preview
62575
Бренд: Lakeland Страницы: 12
Cobra Acoustic ACA-003 Quick Start Manual preview
ACA-003
Бренд: Cobra Acoustic Страницы: 2
DAPAudio Core Mix-2 USB Manual preview
Core Mix-2 USB
Бренд: DAPAudio Страницы: 21
Comodo USB DJmix 5000 Sound master Quick Start Manual preview
USB DJmix 5000 Sound master
Бренд: Comodo Страницы: 3
DeWalt DW134 Manual preview
DW134
Бренд: DeWalt Страницы: 72
DeWalt DWD241 Original Instructions Manual preview
DWD241
Бренд: DeWalt Страницы: 76
Barnstead International Maxi-Mix 1329 Series Operation Manual preview
Maxi-Mix 1329 Series
Бренд: Barnstead International Страницы: 8
Bodum Bistro 11381 Instructions For Use Manual preview
Bistro 11381
Бренд: Bodum Страницы: 97
BVE SENZA Manual preview
SENZA
Бренд: BVE Страницы: 9
DIY Guitar Pedals Big Knob Manual preview
Big Knob
Бренд: DIY Guitar Pedals Страницы: 7
Sencor STM 3620WH User Manual preview
STM 3620WH
Бренд: Sencor Страницы: 16
SKB Stage Five Owner'S Manual preview
Stage Five
Бренд: SKB Страницы: 8
Edirol M-100FX Owner'S Manual preview
M-100FX
Бренд: Edirol Страницы: 184
newform CLASS-X Series Instructions Manual preview
CLASS-X Series
Бренд: newform Страницы: 12
Univex Swing Ring SRM20 Service Manual preview
Swing Ring SRM20
Бренд: Univex Страницы: 25
YORKVILLE PM16-2 Service Manual preview
PM16-2
Бренд: YORKVILLE Страницы: 49
Digitus DS-72001 User Manual preview
DS-72001
Бренд: Digitus Страницы: 22
BDI RADIUS 8839 Assembly Instructions preview
RADIUS 8839
Бренд: BDI Страницы: 3

Бренды по названию

Популярные бренды

Загрузить еще бренды