Mackie D8B 3.0 Скачать руководство пользователя страница 61

Страница: 61 / 171

D8B Manual • Chapter 3 • page 55

Modify Levels (Alt+M)

• Use this control to modify all selected channels

for the user-selected parameter.

• Choose the type of parameter in the top pull-down

button.

Set the action to Trim, Set, Min, or Max.

•

Trim

adds or subtracts the selected value from all

selected channels for the selected parameter.

•

Set

moves the selected parameter to the specified

value for all selected channels.

•

Min

limits the minimum parameter setting to the

specified value for all selected channels.

•

Max

limits the maximum parameter setting to the

specified value for all selected channels.

Note:

The Modify Levels command affects automation

data only if the

Include Automation

box is checked. If

the box is checked, levels are modified globally across
the complete SMPTE time line on selected channels,
for the selected parameter.

Insert Time

• Within the Mix Editor, this inserts a region of no

data change in the selected channel region.

• The amount of blank time inserted is equal to the

length of the selected region.

• Functional on any number of selected tracks.

Delete Time

• Deletes a selected time region in the Mix Editor

window, including all data and changes.

• The amount of deleted time is equal to the length

of the selected region.

• Functions on any number of selected channel

regions.

Insert Global Time

• With the Mix Editor open, this feature globally

inserts a region of no data change at the selected
start point (on all channels for all data).

• Selecting Insert Global Time in the Edit menu

opens a window with settings for the insert start
point and length of time inserted.

Delete Global Time

• With the Mix Editor open, this feature globally

deletes a region of data change at the selected
start point (on all channels for all data).

• Selecting Delete Global Time in the Edit menu

opens a window with settings for the deletion
start point and length of time deleted.

Clear Automation

• Removes all automation data globally for the

selected channels and the selected categories.

• This action can be undone.
• This action is listed in the History List and

remains available for an Undo at any point, as
long as it remains in the list.

• Plug-in automation is cleared by removing the

plug-in from its assigned slot.

Clear Edit History

• Removes all items from the History window.
•

This cannot be undone!

Play From Selection (Ctrl+Space)

• This action starts playback of the onboard D8B

transport from the start time entered in the Mix
Editor start time window.

Select All (Ctrl+A)

• Operates on list type windows (Snapshot,

Locator, MIDI Map, etc.) for selecting all list
items for deletion.

Содержание D8B 3.0












































































































































































Результаты поиска

Содержание D8B 3.0

Отзывы:

Похожие инструкции для D8B 3.0

Бренды по названию

Популярные бренды

Mackie D8B 3.0, Руководство пользователя

Результаты поиска

Содержание D8B 3.0

Отзывы:

Похожие инструкции для D8B 3.0

Бренды по названию

Популярные бренды