manualshive.com logo in svg

Mackie D8B 3.0, Руководство пользователя

Mackie D8B 3.0 - качественный цифровой микшерный пульт для профессиональных звукорежиссеров и музыкантов. Скачайте бесплатно Руководство пользователя на manualshive.com, чтобы получить полное представление о том, как использовать все функции этого мощного оборудования.

Поделиться
Скачать
background image

D8B Manual • Chapter 3 • page  56

The Channel Menu

The Channel menu contains:

• Channel List (Ctrl+B)

• Open Channel…

• Save Channel As…

• Group (Ctrl+G)

• Ungroup

• Channel Link… (Ctrl+L)

• Unlink (Ctrl+U)

• Faders to Unity (Ctrl+])

• Faders to Off (Ctrl+[)

• Adjust Channel Delay…

• Reset Channel Delay…

• Reset Channel Layout...

• Select Fader Bank (Alt+A)

• Select All Faders (Alt+Shift+A)

Let’s take a quick look at each menu item.

Channel List (Ctrl+B)

• Allows for quick and easy setting of global

channel parameters.

• Change the channel name.
• Easily set groups.
• Set playback status to Run, Punch-Run, or

Disabled.

• Solo isolate channels.
• Quickly set channel links.
• Set individual channel delays of up to 255

samples (see “Adjust Channel Delay” on page 59).

• Turn digital filter on or off (to eliminate analog

channel noise).

Playback

—Allows automation playback enable

and bypass for the individual channels. This feature
is used in addition to the global automation bypass,
but works on a per-channel basis. There are three
modes within Playback: Run, Punch-Run and
Disabled.

Note:

 The three different Playback modes, Run,

Punch-Run, and Disabled, all operate in the same
manner for MIDI I/O as they do for automation.
Remember that MIDI I/O pertains only to Fader,
Mute, and Pan automation and control.

Run:

 This is the default mode, and if dynamic

automation is present on the channel, automation
moves play back when time code is received and the
global automation bypass is disabled.

Disabled:

 This mode simply disables automation

playback on the individual channel, regardless of the
global Bypass status. “Disabled” is a safe area that you
can use to prevent automation playback from chasing
and overwriting your latest edits before you get a
chance to commit the settings. The “Disabled” feature
is also handy for setting up parameters within the
context of a mix, relative to whether other individual
channels or sections are automation bypassed.

Punch-Run:

 Once you’ve automated a channel, you

might want to preset a punch-in level to drop or
boost the parameter of interest (especially a fader).
In Absolute mode (Auto Touch off), the parameter
cannot be altered if it is chasing automation, as you
can see when you grab a fader knob during
automation playback and it “fights” you. For this
purpose, we created the Punch-Run mode. Place the
channel in Punch-Run, which releases the playback
chase mechanism until the channel has been placed
in any automation Write mode. When Punch-Run is
engaged, you can roll back the tape, freely adjust the
parameter level and, when the punch-in point arrives
to set the new level, press the WRITE button on the
channel and the parameter level will be written to
the track. At punch-out, two things will occur: the
parameter level jumps to any preexisting level on the
track (similar to Write Flyback, but the level is not
necessarily the original level) and the channel
parameters now chase on subsequent playback.

You cycle through the modes by clicking on the

Playback column in the specific channel’s row. From
the console, hold down an individual channel strip’s
SELECT button for 2 seconds, and then press the

Содержание D8B 3.0












































































































































































Отзывы:

Нет отзывов

Похожие инструкции для D8B 3.0

Mad Professor Kosmos Owner'S Manual preview
Kosmos
Бренд: Mad Professor Страницы: 2
DAPAudio LIVE 16 User Manual preview
LIVE 16
Бренд: DAPAudio Страницы: 19
Graphite 58G782 Instruction Manual preview
58G782
Бренд: Graphite Страницы: 72
Ratek RSM7DC User Manual preview
RSM7DC
Бренд: Ratek Страницы: 16
FAME Loop Station User Manual preview
Loop Station
Бренд: FAME Страницы: 17
Malmbergs JFC125 Instruction Manual preview
JFC125
Бренд: Malmbergs Страницы: 76
Mod K-956 Instructions Manual preview
K-956
Бренд: Mod Страницы: 11
FAME Chorus LEF-304 User Manual preview
Chorus LEF-304
Бренд: FAME Страницы: 15
Tower Hobbies T12039 Safety And Instruction Manual preview
T12039
Бренд: Tower Hobbies Страницы: 16
Bake Max BMPM20A Operation Manual preview
BMPM20A
Бренд: Bake Max Страницы: 10
Emerson EM82811 Instruction Manual preview
EM82811
Бренд: Emerson Страницы: 4
Zoom G5n Operation Manual preview
G5n
Бренд: Zoom Страницы: 56
Sapir SP-1110-GPN Instruction Manual preview
SP-1110-GPN
Бренд: Sapir Страницы: 28
Gemini MM-01 Operation Manual preview
MM-01
Бренд: Gemini Страницы: 12
Bartscher 130.110 Manual preview
130.110
Бренд: Bartscher Страницы: 61
Bartscher 101.926 Instruction Manual preview
101.926
Бренд: Bartscher Страницы: 92
Applica MXB-5U Use And Care Book preview
MXB-5U
Бренд: Applica Страницы: 2
UFESA BV4625 Operating Instructions Manual preview
BV4625
Бренд: UFESA Страницы: 38

Бренды по названию

Популярные бренды

Загрузить еще бренды