• Output impedance 1 k
Ω
• Dimensions 113 x 65 mm
• Weight 300 g
CONTROLS:
• MODE: Selects the active reverb program
• TIME: Controls the length of reverb tail
• LEVEL: Controls the level of effect added to
dry signal
• TONE: Adjusts the attenuation of high frequency
tone in reverb only
• CONTROL: Program dependent control, see the
program matrix
• FOOT SWITCH: Effect bypass with brief press/
Freeze or swell control when hold down
LED STATES:
• LED OFF: Effect is off
• LED ON: Effect is on
• LED BLINKING: Supply voltage is too high and
effect is OFF to protect internal circuits
• LED BLINKING WHILE FOOT SWITCH IS
HOLD DOWN DURING POWER UP:
Indicates new configuration. See paragraph
”Kosmos configurations”.
POWER REqUIREMENTS:
6F22 9V battery or DC eliminator 2.1 mm plug
center negative and positive sleeve.
The manufacturer claims that the above mentioned
product fulfils the requirements as set by EN 55013,
EN 55020, EN 60555-2 and EN 60555-3, RoHS
and WEEE.
C A U T I O N !
Never operate the unit with its bottom removed or
damage will most likely occur.
Mad Professor pedals carry a 2 year limited warranty.
MAD PROFESSOR AMPlIFICATION lTD
Finland
www.mpamp.com • [email protected]
This product is designed and manufactured by
