manualshive.com logo in svg

Mackie D8B 3.0, Руководство пользователя

Mackie D8B 3.0 - качественный цифровой микшерный пульт для профессиональных звукорежиссеров и музыкантов. Скачайте бесплатно Руководство пользователя на manualshive.com, чтобы получить полное представление о том, как использовать все функции этого мощного оборудования.

Поделиться
Скачать
background image

D8B Manual • Chapter 2 • page 37

• This button must be turned off before any auto-

mation can be recorded or played back.

• Toggling Bypass doesn’t affect the automation

filter LEDs (Faders, Mutes, Pan, All). How-
ever, when Bypass is on no automation data
will be recorded.

FADER MOTORS OFF button

• Pressing this button (so the yellow light is on)

disengages fader motors, which prevents any
automated fader movement during automated
playback.

• When the button is engaged, all faders snap to off.

• Turning fader motors off does not affect

changes that have been recorded during auto-
mation record passes. All automated levels still
play back even though the faders don’t move.

• The on-screen faders still show movement

even when the physical faders are off. Fader
moves may still be written to automation using
the mouse.

FADERS button

Allows writing of Fader moves during an

automation pass. When FADERS is activated, all
fader moves on write-enabled channels are written
into automation. Can be used in conjunction with
MUTES, PAN, and ALL.

MUTES button

Allows writing of mutes during an automation

pass. When MUTES is activated, all mutes on write-
enabled channels are written into automation. Can
be used in conjunction with FADERS, PAN, and ALL.

PAN button

Allows writing of Pan moves (stereo and

surround) during an automation pass. When PAN is
activated, all pan changes on write-enabled channels
are written into automation. Can be used in
conjunction with FADERS, MUTES, and ALL.

ALL button

• Allows writing of all automation parameters

other

 

than faders, mutes, and pan.

• In order to record an automation pass, record-

ing every automatable parameter, FADERS,
MUTES, PAN, and ALL must be activated.

• Parameters selected by the ALL button are

Aux 1–12 levels, Aux 9–12 pans, Master Aux
levels, Digital Trim, all channel DSP functions
(EQ and Dynamics), plus Plug-in/Effects parame-
ters, bus assignments, surround panning, etc.

AUTO TOUCH Mode

• Activates Auto Touch write mode for auto-

mation data.

• All activated automation control points be-

come write-enabled and enter automation
record mode at the instant they’re modified
from their current state.

• It’s not necessary to engage individual chan-

nel WRITE buttons in this mode. Manually
engaging WRITE in this mode only affects
fader, mute, and pan writing (if they’re acti-
vated in the Automation section).

• The channel WRITE button illuminates as soon

as a channel function is manually adjusted
(and the corresponding filter is activated).

• One or more of the automation buttons (FAD-

ERS, MUTES, PAN, or ALL) must be activated
or nothing will be written to automation.

Note:

 Fader, mute, and pan data may be over-

written if these filters are activated and the
channel is write-engaged.

TRIM LEVELS button

• Activates Trim Level automation on all write-

enabled channels. This refers to trimming
automated moves up or down, not to analog or
digital level trim controls.

• All faders move to unity (U) and fader motors

are turned off.

• Previously recorded automation remains in-

tact. However, fader and V-Pot changes are
simply added to or subtracted from existing
data.

• This is a good way to edit parts of an automa-

tion track. See “Modify Levels” on page 55 for
level-adjusting an entire track.

Содержание D8B 3.0












































































































































































Отзывы:

Нет отзывов

Похожие инструкции для D8B 3.0

Waring WDM 360 Instructions Manual preview
WDM 360
Бренд: Waring Страницы: 20
Yamaha EMX3500 Manuel De Fonctionnement preview
EMX3500
Бренд: Yamaha Страницы: 21
Yamaha MG124CX Owner'S Manual preview
MG124CX
Бренд: Yamaha Страницы: 24
Oster FPSTHB5103B Instruction Manual preview
FPSTHB5103B
Бренд: Oster Страницы: 26
Q-Pumps QIM Series Assembly And Installation Manual preview
QIM Series
Бренд: Q-Pumps Страницы: 24
Vongon Paragraphs User Manual preview
Paragraphs
Бренд: Vongon Страницы: 17
Gastroback Design Stand Mixer Advanced Pro Operating Instructions Manual preview
Design Stand Mixer Advanced Pro
Бренд: Gastroback Страницы: 52
Adexi GASTRONOMA 18210001 Manual preview
GASTRONOMA 18210001
Бренд: Adexi Страницы: 55
emerio HM-110016.1 Instruction Manual preview
HM-110016.1
Бренд: emerio Страницы: 31
Biamp AudiaFLEX Manual preview
AudiaFLEX
Бренд: Biamp Страницы: 3
TC Electronic INFINITE MINI SAMPLE SUSTAINER Quick Start Manual preview
INFINITE MINI SAMPLE SUSTAINER
Бренд: TC Electronic Страницы: 17
Ibanez PENTATONE GATE Owner'S Manual preview
PENTATONE GATE
Бренд: Ibanez Страницы: 2
BYOC Scrambled Octave Instructions Manual preview
Scrambled Octave
Бренд: BYOC Страницы: 24
Siemens MQ964 Series Instruction Manual preview
MQ964 Series
Бренд: Siemens Страницы: 108
Art Model 405 Specifications preview
Model 405
Бренд: Art Страницы: 1
Denon DN-412X User Manual preview
DN-412X
Бренд: Denon Страницы: 36
Gemini CDM-1000 Operation Manual preview
CDM-1000
Бренд: Gemini Страницы: 5
Gemini BPM-1000 Manual preview
BPM-1000
Бренд: Gemini Страницы: 13

Бренды по названию

Популярные бренды

Загрузить еще бренды