manualshive.com logo in svg

Mackie D8B 3.0, Руководство пользователя

Mackie D8B 3.0 - качественный цифровой микшерный пульт для профессиональных звукорежиссеров и музыкантов. Скачайте бесплатно Руководство пользователя на manualshive.com, чтобы получить полное представление о том, как использовать все функции этого мощного оборудования.

Поделиться
Скачать
background image

D8B Manual • Chapter 1 • page  19

13. Remove the 2nd floppy disk when prompted and

power down the console power supply, then
power back on.

14. You now have the updated D8B operating

system installed.

15. Make sure you read the release notes. They

have important info about this upgrade.

Note:

 Repeat the above procedure with the

Demo_Plugins_3xxx_PC.zip

 file to install the

plug-in update. After updating the plug-ins
software on the D8B, you 

must

 perform the “Erase

UFX Memory” and “Upgrade UFX Cards”
procedures (under Windows in the upper menu
bar) to upgrade the UFX cards that are installed in
the D8B (see page 86).

Macintosh Computers

Follow these steps if you are downloading

onto a Mac OS

®

 computer:

1. Download the self-extracting file

d8b3xxxx_Mac.sea

 for the operating system

installation, and the D8B Plug-in Demo Kit
(

Demo_Plugins_3xxx_Mac.sea

) for the plug-ins

installation.

2. We recommend that you update the operating

system first. Double-click on the

Demo_Plugins_3xxxx_Mac.sea 

file to extract

the two disk images.

3. Launch Apple's DiskCopy utility (you may need

to download the DiskCopy utility from http://
www.apple.com or check the system
installations disks that came with your system).

4. Depending on your version of DiskCopy, either

click the "Load Image File..." button or choose
"Make a Floppy" from the Utilities menu.

5. Locate the image file labeled 

d8b3xxxx Install

1.img

 that was extracted onto your hard drive.

6. DiskCopy will prompt you (depending on your

version of DiskCopy) to insert a floppy disk into
the floppy disk drive. With older versions of Disk
Copy, you may need to click the "Make a copy"
button first.

7. Once the disk has been ejected from the

computer, be sure to label your disk so you know
which is #1 and which is #2. Then follow steps 4
through 6 to create the second installation disk
from the second disk image file (

d8b3xxxx

Install 2.img

).

8. With the D8B console power supply turned off,

insert installation disk #1 into the floppy disk
drive.

9. Power on the console power supply.
10. Follow the instructions on the D8B control

surface. (

Note:

 The installer no longer uses the

VGA screen; typical boot is about 30 seconds.)

11. Place the 2nd floppy disk in the drive when

prompted by the installation software.

Updating Software

Software upgrades can easily be downloaded

from the Mackie website at www.mackie.com.
Find the D8B section and select “Downloads.”

Always read the Release notes that accompany the
software downloads.

 They contain valuable infor-

mation specific to the current software revisions
and install procedures.

Windows-based Computers

Follow these steps if you are downloading

onto a Windows

®

-based computer:

1. Download the .ZIP files 

d8b3xxxx_PC.zip

 for

the operating system installation, and the D8B
Plug-in Demo Kit (

Demo_Plugins_3xxx_PC.zip

)

for the plug-ins installation.

2. We recommend that you update the operating

system first. Double-click on the 

d8b3xxxx_PC.zip

file. This will launch the WinZip™ self-
extraction utility.

3. The default "Unzip To" directory is set to C:\. If

you prefer to have the files extracted to a
different location, type the path into the provided
text box and then press the Unzip button. Quit
the WinZip™ self-extraction utility.

4. Locate the two extracted files, labeled

d8b3xxxx Install 1.exe

 and 

d8b3xxxx Install

2.exe

, on your hard drive.

5. Double-click on the first file, 

d8b3xxxx Install

1.exe

, and you'll see a "WinImage™ Self

Extractor" dialog box.

6. Ensure that the "Writing On Floppy" check box

is selected, then click the "OK" button in the
upper right corner of the dialog box.

7. When the "Batch Assistant" dialog box appears,

insert a double-sided, high-density 1.44MB
floppy disk into drive A:\ and then click the
"OK" button.

8. When the Winimage™ utility has completed

writing to the first disk, be sure to label your
disks so you know which is #1 and which is #2.
Additionally, be sure not to leave either disk in
your floppy drive. Rebooting your PC with the
disk in the drive can create problems with your
PC. Repeat steps 5 through 7 for the second
disk image file.

9. With the D8B console power supply turned off,

insert installation disk #1 into the floppy disk
drive.

10. Power on the console power supply.
11. Follow the instructions on the D8B control

surface. (

Note:

 The installer no longer uses the

VGA screen; typical boot is about 30 seconds.)

12. Place the 2nd floppy disk in the drive when

prompted by the installation software.

Содержание D8B 3.0












































































































































































Отзывы:

Нет отзывов

Похожие инструкции для D8B 3.0

Teac 3 Service Manual preview
3
Бренд: Teac Страницы: 22
M-Audio ProjectMix I/O Benutzerhandbuch preview
ProjectMix I/O
Бренд: M-Audio Страницы: 45
Oster 350-Watt 12-Speed all Die-Cast Stand Mixer User Manual preview
350-Watt 12-Speed all Die-Cast Stand Mixer
Бренд: Oster Страницы: 20
IMG STAGELINE 20.0860 Instruction Manual preview
20.0860
Бренд: IMG STAGELINE Страницы: 18
Yellowtec intellimix Manual preview
intellimix
Бренд: Yellowtec Страницы: 32
Labo K Effects Spinyverb Manual preview
Spinyverb
Бренд: Labo K Effects Страницы: 9
JTS PMM-4 Manual preview
PMM-4
Бренд: JTS Страницы: 8
Source Audio Soleman User Manual preview
Soleman
Бренд: Source Audio Страницы: 39
Logitech G 945-000024 User Manual preview
945-000024
Бренд: Logitech G Страницы: 89
CONTINENTAL EDISON CERP1200GB Instruction Manual preview
CERP1200GB
Бренд: CONTINENTAL EDISON Страницы: 17
Aeta Audio Systems 4MinX User Manual preview
4MinX
Бренд: Aeta Audio Systems Страницы: 97
T-Rex DR SWAMP User Manual preview
DR SWAMP
Бренд: T-Rex Страницы: 5
T-Rex fat shuga User Manual preview
fat shuga
Бренд: T-Rex Страницы: 8
Denon MC6000 MKII Manual preview
MC6000 MKII
Бренд: Denon Страницы: 10
Denon DN-X050 Owner'S Manual preview
DN-X050
Бренд: Denon Страницы: 9
Melissa 646-050 Specifications preview
646-050
Бренд: Melissa Страницы: 1
Melissa 16200081 Manual preview
16200081
Бренд: Melissa Страницы: 19
Denon DN-X1600 Owner'S Manual preview
DN-X1600
Бренд: Denon Страницы: 32

Бренды по названию

Популярные бренды

Загрузить еще бренды