MacDon TR41 S, Руководство оператора, Страница: 73 / 80

Lubrication and maintenance
71
9.2.8 Readjusting on the transmission system
Due to frequent use, stretching of the wires, and wear of the brake pads, it
may be necessary to readjust the brake transmission system.
a. If adjustment is required to the same extent on both axles, loosen the
fixing nut Nr.1, remove the cotter pin Nr.2 and the pin Nr.3, then turn
the fork Nr.4 further by 2-3 turns. Then replace the pin and cotter pin
and tighten the lock nut at the end of the fork.
b. If adjustment is required only on the front axle, loosen the nut Nr.1,
remove the cotter pin Nr.2, and the pin Nr.3, then turn the fork Nr.4 on
the threaded pin Nr.5 by 1-2 turns. Then replace the pin and cotter pin
and tighten the lock nut at the end of the fork.
1
2
4
3
1
3
2
4
5