MacDon TR41 S, Руководство оператора, Страница: 37 / 80

Commissioning
35
After that, install the towbar as follows:
1. Remove one lynch pin Nr.1 from pin Nr.3 of the drawbar Nr.2.
2. Remove the pin Nr.3 and washer Nr.4.
3. Place the drawbar Nr.2 on the welded towing component of the trailer so
that the bushings are coaxial, then insert the pin Nr.3 through the bushings
and the washer Nr.4.
4. Replace the lynch pin Nr.1.
5. Adjust the height of the drawbar eye (if necessary). For this, turn the lever
Nr.1 clockwise or counterclockwise. After connecting the trailer to the
towing machine, fold the trailer jack Nr.2 up to 90° pulling out the U-shaped
pin Nr.3.
1
2
3
4
1
2
3