MacDon TR41 S, Руководство оператора, Страница: 45 / 80

Commissioning
43
Default factory settings of the header support arms as follows:
7.6.1.2 Displacing and tilting the support beam for each support arm kit
To move the support beam Nr.1, loosen the M12x70 bolts Nr.2 and move the
support beam longitudinally to the desired position. To tilt the support beam,
remove the spring pin Nr.3 and remove the locking pin Nr.4. After setting the
desired angle, replace the locking pin in the appropriate hole and replace the
spring pin.
7.6.2 Position of rear cradle (for each type of headers)
To move the support cradle Nr.1 along the frame, loosen the M16 lock nut
Nr.2. The support cradle can be tilted by the turnbuckle Nr.3 after the lock nut
Nr.4 has been loosened.
1
2
3
4
Header A (mm) B (mm)
MacDon corn headers 354 280
MacDon draper on
combine
410 344