MacDon TR41 S, Руководство оператора, Страница: 60 / 80

Lubrication and maintenance
58
9.1.2 Lubrication steps
1. Stop the engine of the towing vehicle and remove the ignition key.
2. Secure the towing vehicle and the trailer with the wheel chocks against
rolling away.
3. Remove the grease nipple cap (if available).
4. Clean the grease nipple from dirt.
5. Apply the lubricant to the correct position via the grease nipple. Use a
brush to grease the moving surface of towing eye.
6. Remove excess lubricant.
7. Replace the grease nipple cover (if available).
WARNING!
The use of liquid lubricants is not
permitted!
9.2 Maintenance
9.2.1 Wheels
- Always check the tire pressure before operating the trailer (see 5.3).
- If the wheels are removed, follow the sequence for tightening the wheel nuts
in section 7.4 when refitting.
- The damaged tire shall be changed or repaired in a service workshop which
has the relevant authorization.
-
In case of changing or repairing the tire the manufacturer’s instruction shall
be followed.
- When removing the tire, the tire pressure must not exceed 2,5 bar ( 35 PSI ).
WARNING!
Make sure that there is a conical wheel nut washer
under the nuts! The tightening torque of the wheel nuts
is 270-290 Nm.