MacDon TR41 S, Руководство оператора, Страница: 44 / 80

Commissioning
42
7.6 Adjustment and inspection tasks before placing the header on to the
trailer
7.6.1 Adjusting the support arms, checking their position
WARNING!
The support arms shall be adjusted
on a trailer which parked on level
ground.
The header trailer is shipped from the factory adjusted to the type of header
specified when ordering, but as the angular position and lifting height may vary
by combine / tractor type, it may be necessary to change the factory setting.
The securing of the he ader may vary depending on the mounting brackets.
The support brackets have different designs depending on the type of header.
See the following sections for more information on the different designs.
7.6.1.1 Adjusting the support beam holder
– for each support arm kit
The support arms for the supporting of the header can be tilted if necessary.
To tilt the arm Nr.1, loosen the M20 locknut Nr.2 and turn the turnbuckle Nr .3
in the appropriate direction. After adjusting the correct angle position, retighten
the locknut Nr.2.
3
1
2