262391
189
Revision A
1010816
A
Figure 4.199: Right Driveshield
4.
Open right driveshield (A). For instructions, refer to
Checking the conditioner roll timing gearbox lubricant level:
1018371
A
B
Figure 4.200: Roll Timing Gearbox
5.
Clean any dirt from around lubricant level sight glass (A)
and breather (B) on the inboard side of the gearbox.
6.
Ensure that the lubricant is level at the top of the sight
glass. If necessary, add lubricant through breather (B).
7.
Add lubricant to the gearbox if necessary. Refer to this
manual
’
s inside back cover for a list of recommended fluids,
lubricants, and capacities.
Changing the conditioner roll timing gearbox lubricant:
DANGER
To prevent injury or death from the unexpected start-up or fall of a raised machine, always stop the engine and remove
the key from the ignition before leaving the operator
’
s seat or making adjustments to the machine. If the rotary disc
header is raised, always close the lock-out valves, and place blocks under the header. Never work on or beneath an
unsupported header.
