NOTE:
Image shows
fi
lter head removed for component clarity.
1. Clean the gasket groove (B) in the
fi
lter head (A).
2. Apply a thin
fi
lm of clean oil to the
fi
lter gasket (C).
IMPORTANT:
Do
NOT
pre-
fi
ll
fi
lter before installation as this may
potentially introduce un
fi
ltered oil into the system.
3. Install new gasket (C) into the groove (B) in the
fi
lter
head (A).
4. Screw the new
fi
lter (D) onto the
fi
lter head until the
gasket just contacts the
fi
lter.
Figure 5.27: Return Filter
5. Tighten
fi
lter (A) an additional 3/4 turn by hand.
IMPORTANT:
Do
NOT
use a
fi
lter wrench to install oil
fi
lter.
Overtightening can damage gasket and
fi
lter.
6. Check hydraulic
fl
uid levels. Refer to
. For capacity level, refer to
5.1.3 Lubricants, Fluids, and System Capacities, page
236
.
Figure 5.28: Return Filter
214053
255
Revision A
Содержание M1240
