![background image](http://html.mh-extra.com/html/macdon/m1240/m1240_operators-manual_685727260.webp)
6. If required to get the platform to sit correctly on the front
guide, adjust the horizontal position of the platform.
Loosen bolts (A) and adjust bolt (B).
7. Tighten bolts (A) to 68.5 N
·
m (50.5 ft
·
lbf).
8. Use bolts (C) to adjust the platform angle. Tighten
bolts (C) to 68.5 N
·
m (50.5 ft
·
lbf) after adjustment is
complete.
Figure 5.12: Left-Hand Platform
5.4.4 Accessing Tool Box
A tool box is located inside a storage compartment under the left cab-forward platform.
1. Grasp handle on storage compartment (A), press latch
(B) and pull to open the compartment.
Figure 5.13
2. The tool box (B) is located inside storage compartment
(A).
3. Swing compartment (A) under platform to close it and
push on handle to secure latch.
NOTE:
The ignition key also locks the storage compartment.
Figure 5.14
214053
248
Revision A
Содержание M1240
