MacDon M1240, Руководство оператора

Страница: 344 / 488

MAINTENANCE AND SERVICING
3. Remove two screws (A) from lens and remove lens.
4. Push and twist light bulb to remove from socket.
5. Install new bulb in socket ensuring that bulb base is
properly engaged in socket.
• Use Bulb Trade #1157 for red tail lights
• Use Bulb Trade #1156 for amber lights
6. Reinstall lens with screws (B).
Figure 5.161: Red and Amber Lights
Replacing Red Tail Lights
DANGER
To avoid bodily injury or death from unexpected startup of the machine, always stop the engine and remove
the key from the ignition before leaving the operator’s seat for any reason.
1. Shut down engine and remove key. Turn lights OFF.
2. Remove two hex fl ange bolts (A) from light (B), and
remove light from bezel.
3. Remove electrical connector from light (B).
4. Connect wiring harness to new light (B), and secure
light to bezel using two hex fl ange bolts (A).
Figure 5.162: Red Tail Lights
214053
332
Revision A