![background image](http://html.mh-extra.com/html/macdon/m1240/m1240_operators-manual_685727169.webp)
2. Remove hairpin (A) from pin (B), and remove pin (B)
from header leg. Repeat on the other header leg.
CAUTION
Check to be sure all bystanders have cleared the area.
3. Start engine.
Figure 4.95: Header Leg
CAUTION
To prevent damage to the header lift linkages when
lowering header lift legs without a header or weight
box attached to the windrower, ensure the
fl
oat
springs tension is fully released.
NOTE:
If not prompted by the Harvest Performance
Tracker (HPT) display to remove
fl
oat, remove
fl
oat manually. Refer to
Figure 4.96: Header Float Springs
4.
For
hydraulic
center-link
with
optional
self-alignment:
a. Press HEADER DOWN switch on the ground
speed lever (GSL) to fully retract header
lift cylinders.
b. Press REEL UP switch on the GSL to raise the
center-link until the hook is above the attachment
pin on the header.
IMPORTANT:
If the center-link is too low, it may contact
the header as the windrower approaches the
header for hookup.
Figure 4.97: Ground Speed Lever Switches
A - Reel Down
B - Reel Up
C - Header Tilt Down
D - Header Tilt Up
E - Header Down
F - Header Up
214053
157
Revision A
Содержание M1240
