Launch X431 V, Quick Start Manual

Page: 1 / 3

Quick Start Guide
Initial Use
Diagun v
Charging & Turning On
Network Setup
Register & Update
1
2
3
1. Connect the power adaptor to the charging port of the tool.
2. If the tool is being charged, a charging indicator displays . Once the indicator turns ,
charging is complete.
3. Pressing the [POWER] button will start the tool and enter the home screen.
*Note On first use of the tool, or if the tool remains idle for a long period of time, there may be
insufficient battery power to start the tool. Please charge for a minimum of 5 minutes before
attempting to turn it on again.
:
Please use the power adaptor included within the kit to charge the tool.
No responsibility can be assumed for any damage or loss caused as a result of using any power
adaptor other than the one supplied.
The tool supports WLAN connection. To enable you to surf the Internet, register App and
update the diagnostic software etc, please follow the steps below to configure the network:
1. On the home screen, tap “Settings” > WLAN.
2. Slide the WLAN switch to ON, the tool starts searching for available WLAN networks.
3. Select a wireless network.
If the chosen network is open the tool will connect automatically.
If the selected network is encrypted, a network password will need to be entered.
4. When “Connected” appears, it indicates the tablet is properly connected to the Internet.
?
?
*Note: when WLAN is not required this should be disabled to conserve battery power.
Launch App :
Tap the application icon to launch it. Tap
“Login” on the right upper corner of the
screen.
a
, tap “New registration” to
open a sign-up page, refer to steps 2~4.
b , tap “Login” to login
directly.
c , tap “Retrieve
password” to retrieve it.
.
.
.
For initial use
If you have an account
If you forgot the password
Serial Number
Activate
Activation Code
> >
Skip
Login
Username
Password
Retrieve password New Registration
Login
Create an App Account :
Fill in each field and tap “Register” to go to
step 3.
*Note: To obtain more functions and better
service, please enter the real information.
Activate VCI Connector :
Input the Product S/N and Activation Code,
and then tap “Activate”.
*Note: The Serial number (a 12-digit number
starting with 98) and Activation code (a 8-digit
number) are stored in the Private & Confidential
sheet.
To exit and activate later, tap “Skip”. In this
case, you can activate it in “Personal Center”
-> “Activate Connector”.
Update Diagnostic Software :
Tap “Yes” to enter diagnostic software
download screen
Tap “Update” to download and install the
diagnostic software.
.
To download it later, tap “No”. In this case, tap
“Software Upgrade” on the Job menu to download
it.
Username
Confirm Password
Email
Select Country
CAPTCHA CAPTCHA
Register
Password
Register
Register
1
2
3
4
Congratulations! You have successfully completed your
registration. Do you want to download the diagnostic
software now?
Yes
No
Register
For initial use, you have to experience a registration process. It mainly includes the
following steps: