![background image](http://html.mh-extra.com/html/macdon/m1240/m1240_operators-manual_685727335.webp)
5.14.6 Engine Speed
The maximum and idle engine speeds are factory set.
Refer to
for detailed information. If speci
fi
ed speeds cannot be maintained, see your
MacDon Dealer.
IMPORTANT:
Do
NOT
remove any seals from injector pump. Removal of seals will void the engine warranty.
5.14.7 Lighting
Aligning Headlights: Engine-Forward
DANGER
To avoid bodily injury or death from unexpected startup of the machine, always stop the engine and remove
the key from the ignition before leaving the operator’s seat for any reason.
NOTE:
Header should be attached and raised to maintain proper windrower stance.
1. Position windrower on level ground 7.5 m (25 ft.) (A) in
front of a vertical surface as shown.
NOTE:
Check that casters are positioned underneath
windrower to properly align headlights.
2. Shut down the engine and remove the key.
Figure 5.141: Windrower Positioning
3. Turn on ROAD lights (A) and switch to LOW BEAM.
Figure 5.142: Road Light Switch
214053
323
Revision A
Содержание M1240
