![background image](http://html.mh-extra.com/html/macdon/d1-series/d1-series_unloading-and-assembly-instructions_685658015.webp)
Section
Summary of Change
Internal Use
Only
•
Clear the area of other persons, pets etc. Keep children away
from machinery. Walk around the machine to be sure no one
is under, on, or close to it.
Calibrating the Auto Header
Height Control
Added WARNING:
•
Clear the area of other persons, pets etc. Keep children away
from machinery. Walk around the machine to be sure no one
is under, on, or close to it.
Tech Pubs
Challenger and Massey Ferguson,
page 363
Added WARNING:
•
Clear the area of other persons, pets etc. Keep children away
from machinery. Walk around the machine to be sure no one
is under, on, or close to it.
Tech Pubs
Setting the Sensitivity of the Auto
Header Height Control
Challenger and Massey Ferguson,
page 365
Added WARNING:
•
Clear the area of other persons, pets etc. Keep children away
from machinery. Walk around the machine to be sure no one
is under, on, or close to it.
Tech Pubs
Setting the Sensitivity of the Auto
Header Height Control
•
Figure
Cleaned picture.
Tech Pubs
Calibrating Reel Height Sensor
CLAAS 600 and 700 Series, page
380
•
Step
Added IMPORTANT:
•
Do
NOT
turn off the engine. The combine has to be at full idle
for the sensors to calibrate properly.
Engineering
9.1.11 CLAAS 8000/7000 Series
Combines, page 383
Added CLAAS 8000/7000 Series topics.
Tech Pubs
Calibrating Reel Height Sensor
John Deere S and T Series, page
447
•
Step
Added IMPORTANT:
•
Do
NOT
turn off the engine. The combine has to be at full idle
for the sensors to calibrate properly.
Engineering
Added WARNING:
•
Never start or move the machine until you are sure all
bystanders have cleared the area.
Tech Pubs
Reworded introduction to specify that the center-link should be
set to
“
D
”
instead of the
“
steepest angle.
”
Tech Pubs
Corrected model year range in topic title:
•
Now
“
2014 and Prior
”
, was
“
2015 and Prior.
”
Tech Pubs
New Holland CR/CX Series, page
471
•
Step
Added steps.
Tech Pubs
215184
xiii
Revision A