![background image](http://html.mh-extra.com/html/macdon/d1-series/d1-series_unloading-and-assembly-instructions_685658333.webp)
215184
309
Revision A
1013274
A
Figure 9.5: Down Stop Washer
3.
Check that float lock linkage is on down stops (washer [A]
cannot be moved) at both locations.
NOTE:
If the header is
NOT
on down stops during the next two
steps, the voltage may go out of range during operation
causing a malfunction of the AHHC system.
1027026
B
A
Figure 9.6: Float Indicator Box
4.
Locate linkage assembly (A). Verify that dimension (B) is set
to 55 mm (2 3/16 in.). If it is not, adjust linkage (A).