![background image](http://html.mh-extra.com/html/macdon/d1-series/d1-series_unloading-and-assembly-instructions_685658341.webp)
215184
317
Revision A
1016975
A
B
Figure 9.20: Optional Two-Sensor Kit
–
Left Sensor
4.
Loosen sensor-mounting nuts (A).
5.
Check that the left sensor is at the correct high voltage limit
according to Table
.
6.
Rotate sensor (B) counterclockwise to lower the voltage.
Rotate sensor clockwise to raise the voltage.
7.
Tighten sensor-mounting nuts (A).
Follow these steps to adjust the right sensor voltage:
8.
Extend guard angle fully; the header angle indicator should be at
D
.
9.
Position header 150
–
254 mm (6
–
10 in.) above the ground; the float indicator should be at
0
.