![background image](http://html.mh-extra.com/html/macdon/d1-series/d1-series_unloading-and-assembly-instructions_685658500.webp)
215184
476
Revision A
1015005
A
B
Figure 9.377: New Holland Combine Controls
3.
Simultaneously press UNLOAD (A) and RESUME (B) buttons
on the control handle.
NOTE:
Software in some New Holland combines may not allow
you to change the header from FLEX to PLATFORM or the
header type from DEFAULT to 80/90 at the main menu. This
is now a dealer setting, and requires you to access the
DEALER SETTING screen by pressing and holding both the
UNLOAD and RESUME buttons on the control handle for
approximately 10 seconds. The DEALER SETTING screen
should appear and will allow you to change the header and
header type settings.
1016105
A
B
C
Figure 9.378: New Holland Combine Display
4.
Select HEAD 1 (A). The HEADER SETUP 1 screen displays.
5.
Select CUTTING TYPE drop-down arrow (B) and change the
CUTTING TYPE to PLATFORM (C).
1016059
A
Figure 9.379: New Holland Combine Display
6.
Select HEADER SUB TYPE drop-down arrow (A). The
HEADER SUB TYPE dialog box displays.