OT Series LED Area Light
Type A Slipfitter Mount
Installation Instruction Manual
Read these instructions completely and carefully. Save these instructions for future use.
• To avoid the possibility of electric shock, turn off power supply before installation or servicing.
Installation and servicing should be performed by qualified technician.
• Before closing cover of fixture, make sure all wires are inside fixture housing to avoid pinching
wires.
• Fixture must be installed in accordance with NEC or local electrical codes.
• For protection, install/service technician should always wear protective goggles and gloves
during the installation and maintenance.
• SolarMax LED is not responsible for any damages caused by parts/components that are not
supplied by SolarMax LED.
Before proceeding with installation or service maintenance of this product:
SolarMax LED | 3080 12th St., Riverside, CA 92507 | (951) 300-0788 | [email protected]
Slip the Slipfitter onto the tenon.
Secure with (4) hex head bolts.
STEP 2
Torque Force ≥ 8.3M/N.m until locking
Remove (4) bolts from the Slipfitter bracket.
STEP 1
