Lucent Technologies PacketStar AC 60, Руководство пользователя

Страница: 164 / 410

Chapter 4 Configuring the Basic System
Configuring the Stratum 3–4 Clock Timing
4-36 255-700-025
PacketStar
™
Access Concentrator 60 User Guide
, Issue 1 Release 6.3.0
Configuring the Stratum 3–4 Clock Timing
Data and voice transmit most efficiently (with the least amount of cells lost
per second) if a proper clock timing source is present in the AC 60.
Therefore, we recommend that you configure the Stratum 3–4 clock timing
before configuring any I/O or server modules.
Note: On the Stratum Configuration window, you establish the source
of the system synchronization. You must configure the Stratum
3–4 clock timing before configuring any user-selected I/O or
server modules. After you have configured the Stratum 3–4 clock
timing, it provides the reference clock to all I/O module ports
configured for local timing.
Setting the Stratum Configuration Values
To configure the Stratum 3–4 clock timing, perform the steps in the following
procedure.
Begin
Configuring the Stratum 3–4 Clock Timing
1
On the Console Interface Main Menu window, select the
Equipment
Configuration
command.
The Equipment Configuration window (see Figure 4-22 on page 4-35) is
displayed:
2
On the Equipment Configuration window, select the
Stratum
3–4 clock
timing and press Enter.
PEC Indicates the product element code (PEC).
Serial #
(serial number) Indicates the unique identifying number to identify a
particular hardware component.
SW Version Indicates the current software version level of the
module.
Table 4-9. Field Values for the Equipment Configuration Window
Field Description