LI-COR LI-7500, Инструкция по эксплуатации

Страница: 78 / 155

Section 3
Setup and Operation 3-49
Some of the configuration items pertain to the LI7500 PC program only, while others are part
of the LI-7500 instrument configuration. This latter group is:
•
Cal Coeffs
•
Zero and Span
•
Inputs
•
Outputs and RS-232
If any of the above items are checked, you can use the “Update LI-7500” check box to have
these items sent to the LI-7500 as well.
NOTE: If you leave “Update LI-7500” unchecked, the selected configuration items will
still show up on the PC program’s windows, from where you can update the LI-7500 if
you choose.
Example: To view the calibration coefficients found in a configuration file without changing
those currently in use in the instrument, follow these steps:
1. Open the Configuration file.
2. Check only the 'Cal Coeffs' check box.
3. Clear the “Update LI-7500” check box.
4. Click Continue.
5. Go to the “Cal Coeffs” tab, and view them.