manualshive.com logo in svg

LI-COR LI-7500, Инструкция по эксплуатации

Поделиться
Скачать
LI-COR LI-7500 Скачать руководство пользователя страница 10

Section 1

1-2

Introduction

IMPORTANT NOTE!  LI-COR Biosciences does not endorse the suitability of the
LI-7500 for applications on moving platforms or in applications where the instrument is
exposed to corrosive elements (i.e., oceanographic salt water spray).  If you have
questions about the suitability of the LI-7500 for your application, please contact
LI-COR.

If you have just taken delivery of your LI-7500, check the packing list to verify that you have
received everything that was ordered and that you have also received the following items:

●

Standard Spare Parts Kit - (part #9975-007).  This kit contains replacement parts for
your LI-7500.  Among other items, the spares kit contains cables and fuses, serial adapter
cable, tubing, and control box mounting brackets.  As you become familiar with the
analyzer you will learn which items to keep close at hand and which items can be stored
away.

●

RS-232 Cables - (see step 4 in the Getting Started Tutorial which follows for information
on connecting the LI-7500 to a computer).  Three RS-232 cables are included:

Part #9975-015 - short cable, to connect the internal RS-232 connector to your
computer, using #9975-016 (below).
Part #9975-016 - 9 pin to 9 pin RS-232 cable.
Part #392-05620 - 4m RS-232 cable, unterminated on one end, to connect to the
external port on the LI-7500 control box.

Содержание LI-7500




























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды