manualshive.com logo in svg

LI-COR LI-7500, Инструкция по эксплуатации

Поделиться
Скачать
LI-COR LI-7500 Скачать руководство пользователя страница 52

Section 3

Setup and Operation

3-23

Y

Slope = A

B

0

V

Figure 3-3.  Response curve for external pressure or temperature sensors.

Use the temperature and pressure radio buttons to select the method for measuring these
values.  If you are using the auxiliary input, enter the values for the multipler (A) and offset
(B).  If you have updated user-entered values, you need to send them to the LI-7500 for
implementation using the 

Update Selected

 button.  Click on 

Cancel All

 to restore any edited

values in this page to their original state.

Using Auxiliary Inputs

The LI-7500 has two auxiliary input channels that can be used to attach either an external
temperature or pressure sensor.  Only one active external sensor can be attached and active at
a time.  The LI7500 software (Inputs Tab) assumes selection of either the internal on-board
sensors, selection of one externally measured sensor in combination with one on-board sensor
or manually entered values of temperature and or pressure with one of these other options.

Содержание LI-7500




























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды