manualshive.com logo in svg

LI-COR LI-7500, Инструкция по эксплуатации

Поделиться
Скачать
LI-COR LI-7500 Скачать руководство пользователя страница 4

iii

NOTICE

The information contained in this document is subject to change without notice.

LI-COR MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED TO THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  LI-COR shall not be liable for
errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.

This document contains proprietary information which is protected by copyright.  All rights are reserved.  No part of this document may be
photocopied, reproduced, or translated to another language without prior written consent of LI-COR, Inc.

© Copyright 2001, LI-COR, Inc.
Publication Number 984-06360
Revision 1 - April, 2001
Revision 2 - November, 2002
Revision 3 - July, 2003
Revision 4 - January, 2004

Printing History

New editions of this manual will incorporate all material since the previous editions.  Update packages may be used between editions which
contain replacement and additional pages to be merged into the manual by the user.

The manual printing date indicates its current edition.  The printing date changes when a new edition is printed.  (Minor corrections and updates
which are incorporated at reprint do not cause the date to change).

Microsoft

®

 and Windows

®

 are registered trademarks of Microsoft Corporation.  Eurofast® is a registered trademark of Turck Inc.

LI-COR, Inc. 

●

 4421 Superior Street 

●

 Lincoln, Nebraska  68504

Phone: 402-467-3576 

●

 FAX: 402-467-2819

Toll-free: 1-800-447-3576 (U.S. & Canada)
e-mail: [email protected] 

●

 www.licor.com

Содержание LI-7500




























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды