manualshive.com logo in svg

LG ESS Home 8, Руководство по установке

Поделиться
Скачать
LG ESS Home 8 Скачать руководство пользователя страница 40

Installation

40

Due to our policy of continuous product innovation, some specifications may change without notice. 

 

©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG” is a registered trademark of LG Corp.

c

Fix the SE Box with 4EA screws and anchors with O-rings in each position. 
Before fastening the screws, place the supplied O-rings on the screws.

 

y

The O-rings must be installed to meet the NEMA 3R requirements when fastening the 
mounting screws. The mounting screws should be chosen considering the O-ring. The 
internal diameter of the O-ring is the 8 mm (5/16 inches).

 

y

Adjust the horizontal level using an inclinometer or a leveler when attaching the SE Box to a 

wall before fixing the screws.

 

y

Depending on the surface, different screws and anchors may be required for installing SE 
Box. Therefore, these screws and anchors are not included. 

 

y

The system installer is responsible for selecting the proper screws and anchors.

 

y

It is recommended to use stainless steel screws which are 8 mm (5/16 inch),  
76 mm (3 inch) in length and have a head diameter of more than 16mm (15/64 inch).

INFO

Содержание ESS Home 8























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды