Getting Started
4
Due to our policy of continuous product innovation, some specifications may change without notice.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG” is a registered trademark of LG Corp.
DANGER
Indicates a hazardous situation that will result
in death or serious injury if the instruction is not
followed.
y
Do not open the door. There are no user serviceable parts inside. Service may be
performed only by trained service provider.
y
Risk of electric shock from energy stored in capacitor. Do not remove the door until 10
minutes after disconnecting all sources when service needed.
y
Electric shock hazard. Do not touch uninsulated wires when the product cover is removed.
y
Do not disconnect, disassemble, or repair to avoid injuries, electric shock or burns.
y
There is a high possibility of electric shock or serious burns due to the high voltages in
the ESS.
y
The AC cables are high voltage. Risk of death or serious injury due to electric shock.
y
This product poses potential danger such as death or serious injury by fire, high voltages,
or explosion if appropriate precautions are not read, fully understood, and followed.
y
Do not place or install flammable or potentially explosive objects near the product or in
explosive atmospheres.
y
Do not charge or discharge arbitrarily. It may lead to fault, electric shock, or burns.
y
Do not damage the unit in any manner, such as by dropping, deforming, impacting,
cutting, or spearing with a sharp object. It may cause electrolyte leakage or fire.
y
Breakdown of the unit may cause electrolyte leakage or flammable gas generation.
y
If electrolytes leak, avoid contact with eyes, skin, or clothes. In event of accidental contact,
flush with water and seek medical help immediately.
y
Do not place near open flame or incinerate. It may lead to fire or explosion.
y
Keep the unit away from moisture or liquid. Do not touch or use the product if liquids
have been spilled on it.
y
Keep out of reach of children or animals.
y
Electrical installations must be done in accordance with local standards, national electrical
safety standards, and the manufacturer's instructions.
y
The battery system is a bidirectional source of voltage. The battery circuit breaker and
inverter must both be off before working in the wiring box.
y
Disconnect each circuit individually before servicing. Both AC and DC voltage sources are
terminated inside this equipment.
y
Do not dispose of batteries in a fire. The batteries may explode.
y
Do not open or assemble while product is working.
