Installation
39
Due to our policy of continuous product innovation, some specifications may change without notice.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG” is a registered trademark of LG Corp.
b
Place the SE Box on a wall which meets every installation condition and clearance
requirement.
Mark the positions to drill using a pencil or other writing utensil. Drill holes in the indicated
positions. It may help to use the true to scale print of the SE Box which provides the hole
positions included in the package.
(The following is an example of possible conduit installations. Depending on the site, the
required conduits and knockout position of the SE box would vary.)
400 mm (15.8 inches)
500 mm (19.7 inches)
520 mm (20.5 inch
es
)
600 mm (23.6 inch
es
)
1,478 mm (58.2 inch
es
)
Fr
om floor
y
Take care in holding the product when mounting the SE Box as it is heavy. It may cause injury.
y
Do not hold the door when mounting. Do not hang anything on the door. It may lead to
deformation or fracture.
y
It is important to ensure the drilling locations are not located on any electrical wiring or
plumbing inside the wall.
WARNING
Be careful not to be injured by the sharp edge when make the conduit hole or connecting a
conduit.
CAUTION
