LG Industrial Systems GLOFA GM6 Series, Руководство пользователя

Страница: 135 / 209

Chapter 13. Dedicated Cnet communication for GM6
13 - 18
The following shows direct variables available according to PLC type.
Type BOOL Byte WORD DOUBLE WORD
GM1/2 %MX,%QX,%IX %MB,%QB,%IB %MW,%QW,%IW %MD,%QD,%ID
GM3/4/5 %MX,%QX,%IX %MB,%QB,%IB %MW,%QW,%IW %MD,%QD,%ID
GM4 %MX,%QX,%IX %MB,%QB,%IB %MW,%QW,%IW %MD,%QD,%ID
GM5 %MX,%QX,%IX %MB,%QB,%IB %MW,%QW,%IW %MD,%QD,%ID
GM6 %MX,%QX,%IX %MB,%QB,%IB %MW,%QW,%IW %MD,%QD,%ID
(3) Response format(for ACK response)
Format name Header Station No. Command Command type Tail Frame check
Frame(Ex.) ACK H20 W(w) SS ETX BCC
ASCII value H06 H3230 H57(77) H5353 H03
•
Station number, commands, and type of command are the same as computer request format.
• BCC : When command is one of lower case(w), only one lower byte of the value resulted by adding 1 Byte
each to ASCII values from ACK to ETX is converted into ASCII, added to BCC, and sent.
Ex.1
If type of data to be currently written is DOUBLE WORD, the data is H12345678, ASCII code converted value of this is
"3132333435363738", and this content must be entered in data area. Namely, most significant value must be sent first,
least significant value must be last.
1) Device data types of each blocks must be same.
2) If data type is BOOL, the data to be written is indicated by 1 Byte of hex. Namely, if Bit value is 0, it must be
indicated by H00(3030), and if 1, by H01(3031).
Remark