Lexmark XM9100 Series, Руководство пользователя

Страница: 59 / 364

–
Have bent corners.
– Have rough, cockle, or laid finishes.
• Adjust the width guides to fit the width of the envelopes.
•
Before loading the envelopes on the tray, flex the stack of envelopes back and forth to loosen them, and
then fan them. Straighten the edges on a level surface.
Note: A combination of high humidity (over 60%) and high printing temperature may wrinkle or seal envelopes.
Tips on using labels
•
From the printer control panel, set the paper size, type, texture, and weight in the Paper menu to match the labels
loaded in the tray.
•
Print samples on labels being considered for use before buying large quantities.
•
For more information on label printing, characteristics, and design, see the Card Stock & Label Guide on the Lexmark
Web site at http://support.lexmark.com .
•
Use labels designed specifically for laser printers.
•
Do not use labels with slick backing material.
• Do not use labels with exposed adhesive.
• Use full label sheets. Partial sheets may cause labels to peel off during printing, resulting in a jam. Partial sheets
also contaminate the printer and the cartridge with adhesive, and could void the printer and toner cartridge
warranties.
• Before loading labels on the tray, flex and fan labels to loosen them. Straighten the edges on a level surface.
Tips on using letterhead
•
Use letterhead specifically for laser printers.
• Print samples before buying large quantities.
• Before loading letterhead, flex and fan the sheets.
•
When printing on letterhead, take note of the page orientation.
Source Printing Side with the
letterhead Paper orientation
Trays One
‑
sided Faceup Load the sheet with the
top edge toward the back
of the tray.
Two
‑
sided Facedown Load the sheet with the
top edge toward the front
of the tray.
Multipurpose feeder One
‑
sided Facedown Load the sheet with the
top edge on the left side.
Two
‑
sided Faceup Load the sheet with the
top edge on the right side.
Paper and specialty media guide 59