Lexmark XM9100 Series, Руководство пользователя

Страница: 199 / 364

Avoid paper jams
Correctly set the paper type and size to avoid paper jams. For more information, see “Avoiding jams” on page 242 .
Saving energy
Using Hibernate mode
Hibernate is an ultra
‑
low
‑
power operating mode.
Notes:
• Three days is the default amount of time before the printer enters Hibernate mode.
• Make sure to wake the printer from Hibernate mode before sending a print job. A hard reset or a long press of
the Sleep button wakes the printer from Hibernate mode.
• If the printer is in Hibernate mode, then the Embedded Web Server is disabled.
1
From the home screen, navigate to:
> Settings > General Settings
2
From the “Press Sleep Button” or “Press and Hold Sleep Button” menu, select Hibernate , and then touch Submit .
Using Eco
‑
Mode
1
Open a Web browser, and then type the printer IP address in the address field.
Notes:
• View the printer IP address on the printer home screen. The IP address appears as four sets of numbers
separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2
Click Settings > General Settings > Eco
‑
Mode > select a setting
Use To
Off Use the factory default settings for all settings associated with Eco
‑
Mode. Off supports the performance
specifications of the printer.
Energy Reduce energy use, especially when the printer is idle.
•
Printer engine motors do not start until it is ready to print. You may notice a short delay before the
first page is printed.
•
The printer enters Sleep mode after one minute of inactivity.
Energy/Paper Use all the settings associated with Energy and Paper modes.
Plain Paper
•
Enable the automatic two
‑
sided (duplex) feature.
•
Turn off print log features.
3
Click Submit .
Saving money and the environment 199